Fixed C channel Steel ground mount
PRO.FENCE supplies HDG steel solar PV mounting is wholly assembled by C- channel steel with higher strength compare with aluminum alloy solar mounting system.The beams and standing posts are fastened by bolts run through tailor-made opening holes without using accessories is for easily construction and cost-saving. As well as adopting strip hole and block clip to install bracket for efficient and convenient installation even constructor at site can operate it independently.
It is suitable for large scale solar PV park, ground solar PV project, flat roof solar project. Applicable in high wind speed and snow loading area.
Rail and beam installed
Rails connected
Beam and post installed
Post and screws installed
Features
- Low cost
Less cost around 15% than that of aluminum alloy material, is the highest cost-effective solution for large scale project.
-Easily assemble
The whole structure is assembled with C-channel steel fastened by bolts run through tailor-made opening holes without using accessories is for easily construction.
As well as its support rack will be pre-assembled at maximum before shipment for saving labor cost at site.
-Long service life
PRO.FENCE supplies steel PV mount is made of Q235 steel with high strength and finished in hot dip galvanized at average zinc coated of 70μm for effective anti-corrosion. That will guarantee our structure up to practical life at 20years.
-Small MOQ
Why HDG steel couldn’t be used wildly in solar PV mount structure is limited by its large MOQ. Our factory located in Hebei province that is rich in steel material could promise delivery at small MOQ.
Specification
Install Site | Open terrain |
Adjustable angle | Up to 45° |
Wind speed | Up to 48m/s |
Snow load | Up to20cm |
Foundation | Ground pile, Screw piles, Concrete base |
Material | HDG Q235, An-AI-Mg |
Module Array | Any layout up to site condition |
Standard | JIS C8955 2017 |
Warranty | 10 years |
Pratical life | 20 years |
COMPONETS
Mid-clamp
Side-clamp
Rail
Pre-assemble support rack
Footbase
Rail splice
Reference
FAQ
1. How many types of ground solar PV mount structures we supply?
Fixed and adjustable ground solar mounting. All shapes structures could be offered.
2. What materials you design for PV mounting structure?
Q235 Steel, Zn-Al-Mg, Aluminum Alloy. Steel ground mounting system has absolutely price advantage.
3. What’s advantage compare with other supplier?
Small MOQ acceptable, Raw material advantage, Japanese Industrial Standard, professional engineering team.
4. What info are required for a quotation?
Module data, Layout, condition at site.
5. Do you have a quality control system?
Yes, strictly as per ISO9001, full inspection before shipment.
6. Can I have samples before my order? What’s the minimum order quantity?
Free mini sample. MOQ Depends on products, please feel free to contact us for any inquires.