Chain link fence gate make an important part for perimeter fencing system. It allows pedestrians and autos to go in and out of the enclosed areas or sites conveniently while remains a safe barrier. The gate is usually made of chain link mesh panels made from galvanized steel wire or plastic coated wire, then framed with tubes and fixed with rollers. The chain-link gates are very much used together with chain link fencing for houses, edifices, ranches and farms. Yudemei supplies tie wire, post caps, gate finger, rings and other accessories for installing the gates.
Chain link gates can be custom made into a range of styles, gate height and colors. We also mainly walk-in gates, single swing gates, double swing gate, cantilever chain link gates without roller, or with roller.
Single swing chain link gate can be made with a larger opening. It is open only by ensuring there is enough space.
Single swing gate can be automated.
Double swing gate can be automated.
Two Swings and a down pole connected to close the gate.
Cantilever Chain link Gate:
This gate can also be made with automated open.
Cantilever Chain Link Gate with a roller:
Rolling on the ground, connected to a rail fence. These doors do not automatically open, you need enough space to rollback.
Specification of Swing Type Chain-link Netting Gates:
| The type of the vertical-hinged gate/door | Single leaf Double leaf |
| Height of gate panel (m) | 1.0m,1.2m,1.5m,1.8m,2.0m |
| Width of gate panel (m) | Single leaf:1m,1.2m,1.5m Double leaf:2.0m,3.0m,4m,5m,6m,8m |
| Gate frame Surface | Square tubes: 35x35mm,40x40mm,50x50mm,60x60mm |
| Surface Treatment | Galvanized Steel pipe+high adhesion electrostatic spraying processing |
| Colour | green, blue, yellow, white, red etc |
Accessories are supplied for installation: post cap, tension bar, tension band, gate finger and more.
Post time: Jan-21-2022